Serum-Free Cell Freezing Medium (2×) Instructions-BioSci™ Dakewe

Product Description

Serum-Free Cell Freezing Medium (2×) is a chemically defined freezing medium developed by Dakewe on the basis of lymphocyte freezing kit, which has clear components and contains neither xenogeneic animal-derived components nor serum. On the basis of obtaining high cell viability and cell yield, this product can effectively avoid the change of serum quality and the impact of serum components and exogenous components on experimental research, and achieve excellent cell freezing and thawing effects.

 

Product Information

Cat. No.	Name	Size
6032011	Serum-Free Cell Freezing Medium (2×)	100mL

 

Direction for Use

Reagents and instruments requiring self-preparation by the experimenter:

• Cell medium (commonly used for culturing cells requiring freezing);
• Clean bench;
• Temperature-controlled centrifuge, equipped with horizontal rotor with 15 mL and 50 mL centrifuge tubes, and recommended use of professional cell centrifuge; the sterile conical tube should be used as the centrifuge tube;
• P20, P200 and P1000 micropipettes and pipette tips, pipette aids and sterile serological pipettes;
• Sterile 0.5 mL and 1.5 mL EP tubes;
• Cell counter;
• Freezing container and sterile cryotube;
• -80℃ freezer;
• Liquid nitrogen tank;
• Water bath at 37°C.

 

Cell Freezing

1. Mark the cryotubes to be used in detail. Place the cryotubes at -20℃ for thermal equilibration, and place the freezing container, cell medium and serum-free cell freezing medium at 4℃ for thermal equilibration.

2. Count the cells to be frozen, and centrifuge 250 g at 4°C for 10 min.

3. (Operation on ice) Discard the supernatant and resuspend with the cell medium equilibrated at 4℃ according to the results of cell count, so that the cell concentration is adjusted to twice the freezing concentration (e.g., if the cell concentration to be frozen is 1 × 10 7 cells/mL, adjust the cell concentration to 2 × 10 7 cells/mL with the medium), and then blow the cells off with the pipette evenly.

Notes: The density of freezing cells recommended for this product is 5 × 10 5 – 2× 10 7 cells/mL, and the appropriate density of freezing cells should be selected according to the nature of freezing cells and subsequent experimental arrangements during freezing.

4. (Operation on ice) Slowly add an equal volume of serum-free cell freezing medium after placement in an ice bath dropwise, and mix gently.

Notes: Be sure to add dropwise to avoid rapid changes in DMSO concentration in the medium.

5. (Operation on ice) Dispense 1 mL of cell suspension per tube into freezing tubes equilibrated at -20°C, and then screw the cap tightly on the freezing tubes.

6. Immediately place the freezing tube in the freezing container that has been equilibrated at 4℃, and then place the freezing container in a -80℃ freezer. Freezing tubes can also be placed in a programmable cooler to cool to -80℃ at a rate of 1℃/min.

7. Transfer freezing tubes stored at -80°C to liquid nitrogen 24 h later.

8. Record the cell freezing location in the liquid nitrogen tank on the liquid nitrogen equipment management sheet in the laboratory.

 

Cell Thawing

1. Perform thermal equilibration on cell medium at 4°C. Perform thermal equilibration on 50 mL and 15 mL centrifuge tubes at 4℃. Preadjust the water bath to 37℃.

2. Remove the cryotubes from liquid nitrogen with forceps. If liquid nitrogen leaks into the freezing tube, unscrew the cap slightly to allow the vaporized liquid nitrogen to escape.

Warning: Some freezing tubes have been reported to explode upon thawing, and to eliminate this hazard, it is recommended that only firm polyethylene freezing tubes be used for liquid nitrogen preservation in experiments.

3. Clamp the freezing tube with forceps and immerse it in the water bath at 37℃ (note that the pipette tip should not be immersed below the liquid level). Gently shake the freezing tube and pay attention to the thawing of freezing cells in the tube. When the ice nucleus becomes soybean-sized in the tube, take it out, wipe the tube body with alcohol cotton, and transfer it to a clean bench.

Notes: This step is critical for cell viability. It is necessary to thaw as soon as possible to reduce the damage to the cells during thawing; in addition, the time of cells staying at high temperature should be reduced as much as possible to reduce the toxicity of DMSO to cells. Do not leave the freezing tube in the water bath.

4. (Operation on ice) Open the cap of the freezing tube. Gently pipette the cell suspension (approximately 1 mL) from the freezing tube into a precooled 15 mL centrifuge tube. Slowly add 5 mL of cell medium (4℃), gently shake while adding, cover the tube cap upon completion of dropping, and mix well by gentle inversion.

5. Continue to add fill up with the medium slowly (4℃) to 14 mL, screw the cap, and mix by gentle inversion.

6. Centrifuge 250 g for 10 min at 4°C. Carefully aspirate the supernatant, and the supernatant is required to be aspirated as far as possible without touching the cells pelleted in the tube bottom. Disperse the cell mass by flicking the finger in the bottom of the centrifuge tube. Add 1 mL of medium and resuspend cells.

Notes: Aspirating the supernatant is more effective than decanting the supernatant, contributing to reduce the residual DMSO; finger flicking of the centrifuge tube can gently disperse the cell mass. Do not blow and aspire with a gun, otherwise it is harmful to the cells.

7. (Optimization step, can be omitted) Cell clumping is caused by entanglement of DNA released from dead cells. 0.1 mL of DNase (1 mg/mL) can be added and incubated at 37°C for 10 min.

8. Take 50 μL of cell suspension and count trypan blue viable cells to calculate viability. Description: Viability = number of viable cells/total number of cells × 100%. In the presence of trypan blue, viable cells are colorless and translucent, while dead cells are blue and dull.

9. According to the counting results, fill up with cell medium to the desired cell concentration for subsequent assay.

 

Storage

Keep away from light at 2~8℃, valid for 12 months.

 

Precautions

• Avoid repeated freezing and thawing of this product, and pay attention to operate aseptically during use.

Associated Product:

Cat. No.	Name	Size
6911011	SUPERCULTURE™ L100 Lymphocyte Serum-Free Medium	1000 mL/bottle
6111021	SUPERCULTURE™ L500 Lymphocyte Serum-Free Medium	1000 mL/bottle
6811021	SUPERCULTURE™ L500 Lymphocyte Serum-Free Medium (GMP)	1000 mL/bottle
7922112	Human peripheral blood lymphocyte separation tube	15 mL × 20 vials, sieve plate tube
7922021	Human peripheral blood lymphocyte separation tube	50 mL × 25 vials, sieve plate tube
7912011	Density reagent	250 mL/bottle
7111011	Human lymphocyte separation medium	100 mL/bottle
6122012	SUPERGROW™ Cell Culture Supplemental Mix	25 mL/bottle
6122011	SUPERGROW™ Cell Culture Supplemental Mix	250 mL/bottle
6813521	Natural Killer Cells Induction Culture Kit	3 L/Kit
6813522	Natural Killer Cells Induction Culture Kit	2 L/Kit
6813523	Natural Killer Cells Induction Culture Kit	1 L/Kit

 

Documents

Serum-Free Cell Freezing Medium (2×) Instructions-BioSci™